Table of contents. Installation manual Prins Diagnostic Software. Green: “communication to AFC-2.0” and black “PDT # FTU7E4LV”. Communication with PDT.
![]() MVI56-AFC
The MVI56 Gas and Liquid Flow Computer Module is a ControlLogix backplane compatible module that allows ControlLogix processors to easily support flow applications performing measurement of hydrocarbon gases or liquids using AGA 3, 7, 8 and API MPMS Chapters 11 and 12 measurement standards.
The module calculates flow rates, accumulated volumes, accumulated mass and accumulated energy (heating value). The calculation results are transferred back to the Processor memory for use in the application ladder program or for transfer back to a SCADA host.
The MVI56-AFC Gas and Liquid Flow Computer product has been approved by Industry Canada's Measurement for complying with Provisional Specifications and Procedures for the approval of Correction Devices and Linearization Functions Incorporated in Meters and Flow Computers.
ArchitecturesFeatures and Benefits
AFC Version 2.05 Update Notice
If your module measures liquids, please read this notice before upgrading from version 2.04 (or earlier) to 2.05 (or later).
For compliance with new measurement standards, the AFC version 2.05 has introduced several new liquid product groups. In particular, the two non-refined liquid product groups of version 2.04, which covered the entire density range of crudes and NGLs, have each been split into two separate product groups, one for the higher density range of crudes and the other for the lower density range of NGLs. If your module has meter channels configured for either 'Crude, NGL' or 'Oil-water emulsion', you should decide before upgrading the firmware the new product group (light or heavy) to which each such channel should be assigned. This assignment will be performed during the upgrade process and will preserve all other configuration and historical records including accumulator values and archives, in contrast to changing a product group after the upgrade which resets the meter configuration and erases all historical records. Meter channels configured for 'Gas' or 'Refined products' are not affected.
AFC Manager exhibits the same behavior when converting a project between versions 2.04 (or earlier) and 2.05 (or later).
The criterion for assigning the new product group depends on the density units and the Default Reference Density, as detailed in the following tables:
Density Units = kg/m3
Density Units = Rd/60
Due to roundoff error of numeric conversions, a Relative Density very close to the cutoff value of 0.6100 may cause the module to assign the new product group opposite to the one that was intended. Before upgrading, change the Default Reference Density to a number significantly different from 0.6100, such as 0.6110 (to target Crude) or 0.6090 (to target NGLs). You may change it back to the correct value after the upgrade
Density Units = API Gravity
Specifications
Hardware
Downloads
Certifications
We have been producing for a long time diagnostic interface cable for various LPG systems. Until now, customers were always dependent to use original software from the producers of LPG installations. From now on no longer. There is new software for Prins VSI 1.BEXPRO-NS is an innovative product which has been programmed to help you to configure the Prins VSI LPG system.BEXPRO-NS New Software for PRINS VSI has 4 integreted languages (german, english, polish, dutch) and possibility to make 7 other languages by yourself.Our EasyConfig system allows you to easily program different operations on your LPG system.
![]()
No need to browse the manual anymore. Simple fill out EasyConfig and BEXPRO-NS will configured your LPG system automatically. It is really very easy. From now on, autocalibration is integrated into the EasyConfig system. Make the adjustmen of your system easily with the help of BEXPRO-NS EasyConfig system. This auto-calibration is part of the Home and Business Edition. This auto calibration sets up RCinj and Offinj values for injection times, so the problems with the engine warning light (CHECK ENGINE), low emission values, problems with stable rpm when switching petrol/lpg are pastBEXPRO-NS Software for Prins VSI works without modification/updates withJust install the interface and start Software and you can adjust your system up to 100m distance.
![]() Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. Archives
March 2023
Categories |